Household pump «SeeD»

Project Tools Project Info

Household centrifugal pump “Seed” is designed for the water pipage; the gardens, orchards, lawns watering; the water delivery from the surface water bodies (rivers, lakes, ponds), as well as from the wells, water storage reservoirs, chinks.

A usual household pump inconveniency is in that it requires a constant human presence and control during the water pipage process.

For example, for the gardens or lawns watering it is needed to switch it on and off at a needed moment. For the water pipage from a piece of water or a chink into a water storage reservoir, it is always necessary to control, when the pump should be switched off, in order not to overfill the tankage. It is often necessary to pump the odd water out again, what causes not only the user’s time loss, but, also, to the additional energy consumption.

A consumer adapts the household pumps himself, binding it to the floating platforms or bending a wire rope with a bracket. Household centrifugal pump “Seed” does not require any additional devices, as there is the synthetic foam inside the pump’s case, which makes it stay up on the water and the ballast in the very bottom part of it does not let the pump roll over.

The pump also has two brackets:
  1. For the fixation on the top, during sinking the pump into a chink
  2. And the bottom mounting for the anchoring the pump to the piece’s      of water bottom

 

 

Household centrifugal pump “Seed” solves these problems and gives freedom to its owner.

There is a remote control on the panel, through which the different parameters of the pump’s turning on and off can be set.

The following parameters can be set through the remote control:

The time of the pump’s turning on and off,

The countdown before the power shutdown,

The amount of the water which flowed through, after which the pump will shutdown.

It is also possible to set the program to be repeated once or multiply, several times during 24 hours or every day.

It is very convenient for the lawn and garden watering, when, for example, the lawn watering is needed every day from 5 till 5.20 a.m. or for the water storage reservoirs filling, when an approximate amount of liters which is needed to be filled is known.

The pump is equipped with the additional valve vents for the ventilation, which stay over the water surface, which pass the heated air out from inside on one side, and the cold air from the environment on the other side. By that arranging the operating engine transparent aeration. The valves do not let the water in.
The pump is connected with the eco technologies sector esthetically. “Seed” economizes electricity which is usually spent for the odd amount of the pumped over water. The pump’s case is made of the recycled plastic, what during the manufacturing economizes the funds for the electronic control function involvement and gives the product a competitive market value.

The “Seed” pump absolutely meet the requirements of the household pumps. Solving the owner’s time and electricity saving problems.

Emotionally “Seed” is flexible and associates with organicity and ecological compatibility. A drop of water and a wheat seed are taken as the shape basis for this pump.

The pump’s remote control can be unfastened if needed. In such a way the pump’s control is possible in a distance, it is very convenient, if there is no open access to the pump’s case (situation in the chinks, wells or in the pieces of water).


by Mukomelov Studio
Get Served Emails